Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.
JMP Marine Impeller Pumps JPR-VK2000 And JPR-VK3000
INTRODUCTION
Flexible Impeller Pumps
Flexible impeller pumps provide an efficient solution to most marine pumping needs. The nprimary advantege of a flexible impeller pump is its Self-priming capability.
As the blades of the impeller are depressed and rebound, they create their own vacum drawing fluid into the pumps (see operating principle)
Pumps instatly with dry suction lift up to 3 meters, up t 9.5 meter when wet. Thus a flexible impeller pump being used in belge,deck wash, or engine cooling need not be located below the water line or manually primed. An added features of flexible impeller pumps is that they can pass fairly large particles without clogging or damaging the pump. This reduces flexible the need for filtering the coming fluid.
A common feature of all flexible impeller pumps isthat they cannot be permitted to ru dry for more than 30 seconds easily replaceable, and service kits are available for all models.
FOR GOOD PUMPING
Pipe runs should always be kept as short and straight as possibl, avoiding rising and over obstructions, as this can create air-locks. Plumbing should be reinforced, non-collapsible hose of the recommended size.
Flexible impeller pumps must not be run dry (more than 30 seconds). Bilge pump water pump in particular should always be fastened to the boat structure to ensure their permanent location. Mount flexible impeller pumps so that some water is left in the pumpbody when the pump is off. This will prolog impeller life and speed priming. Pumps must be installed with the verboard discharge well above the waterline to avoid water syphoning back into the cessel.
FEATURE
-Strong bronze
-Long life mechanical seal
-High performance and long life flexible impeller
-Design with easy replacement of spare parts
-O-Ring seals at andcover (impeller cover) instead of gasket
OTHER
-Manufacturing pump to yous specification is available.(OEM)
-Please contact us dealers when you use for other application.
ELECTRO MAGNETIC CLUTCH PUMPS
JMP electro magnetic clutch pumps are multi-purpose pumps widely used in agricultural, Industrial and marine. Especially in marine uses it can be used in high capacity bilge or deckwash and emergency fire fighting pumps. JMP clutch pumps have high performance at a good price so you can use the clutch pumps with full satisfaction of performance and price. You can also easily replace the worn parts and service kits are available.
-High Power(High Torque), High Capacity
-Aluminum Pulley-Reduce Belt temperature (M40,M50,M65)
-Easy to charge the pulley
-Strong Bronze Body
-Full Rotation of pump ports with rotation impeller housing (M50, M65)
-Powder Coated clutch surface to resist rust
Specification JPR-VK2000 JPR-VK3000
-Port Size 1 1/2 Inch/PIPE 2 Inch/PIPE
-Body Bronze Bronze
-Impeller 8101-01 8301-01
-Shaft Material Stainless / 25 mm Stainless / 25 mm
-Shaft Seal Mechanical Seal Mechanical Seal
-Size (LxWxH,mm) 255x152x133 275x152x149
-Weight (Appx) 9.0 kgs 10.0 kgs
-Service kits (replacement Part)are available